ADM Vixen-Type Dovetail Adaptor for AZ GTi

ADM Vixen-Type Dovetail Adaptor for AZ GTi

  (1 Review)
✓ 2 year warranty


Out of stock due 10-15 working days

About this product

Model:  adm_vpa_azgt
Part Number:  VPA-AZGT

Upgrade the SkyWatcher AZ-GTi to an ADM style clamping system.

Accepts Vixen-type dovetail bars.

Incorporates a split clamp design that grips the dovetail bar along the entire surface of the saddle and will not dent or scratch the dovetail bar.

Features include a large 'T' handle locking knob for tool free operation, spring loaded jaws, anodised aluminium and stainless steel construction.

Length:  1.75″ Long
Width:  2.5″ Wide
Thickness:  .75″ Thick
Weight:  5 oz.

Customer reviews

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating (max 5):  
Much better than the original dovetail mount
11 June 2022  | 

This dovetail mount is well made and it was straightforward to replace the original dovetail mount on my AZ-GTi with this one. It grips the dovetail on my telescope a lot more securely than the original. The matt black finish is a good match to the colours of the AZ-GTi.

The adaptor comes with no instructions. But fitting it was pretty easy. On the existing adaptor the screws are covered by a thin glued on metal plate. I warmed it up with a hair dryer to soften the glue, then prised it off using a flat blade screwdriver. It came off ok and left no gluey residue behind. The original screws need a Phillips screwdriver to remove them. Then the four supplied hex bolts can be used to fit the bracket on, they take a 2.5mm allen key. The actual dovetail adaptor then fits on with two more supplied hex bolts, which seem to be imperial bolts - I think 3/16". I only have metric allen keys, but I found that a 4.5mm allen key fit them good enough to tighten them securely. Fitting the adaptor was a 10 minute job all in.


Please fill in the form below to ask a question.

Please add the two numbers

Related Products
Sky-Watcher Explorer 130PS AZ GTi
Sky-Watcher SkyMax-127 AZ GTi