The ZWO new Nikon-T2-Ⅱ adapter is independently developed by ZWO. It’s composed of a 29mm new Nikon-T2 adapter and a 5mm T2 extender, and suitable for all ASI cameras except full frame cameras like ASI6200 and ASI2400.
|Average Rating (6 Reviews): |
Tuesday, 20 April 2021 | David
The adapter is well made and fits very nicely with no play at all. As others have pointed out it does not allow the aperture lever to be activated thereby opening the aperture on G type lenses to the maximum extent. However, on newer lenses, E type, the aperture is electronically controlled and always fully open unless commanded by the camera. These lenses work perfectly with this adapter. The older G lenses can be made to open up if you fold up a tiny bit of paper and wedge it into the slot with the lever in the right position. It works but you do this at your own risk. You can leave the paper sticking out by about 4mm to make sure you don't lose it. Overall I'm very pleased with the adapter, it works perfectly and allows me to use the ASI camera I bought. Very happy with it.
Excellent for Nikon F mount lenses with an aperture ring.
Friday, 5 February 2021 | William
Just arrived and tested with an Altair Hypercam. Mine did not ship with spacers but I have a set of the Baader T2 spacers already for a related purpose. I tested it out on the Nikon 180mm without a filter installed and the optical length calibration is close to perfect. It is 29mm deep, measured with a digital caliper, and this plus the 17.5mm of my Hypercam sensor depth (like some of the ZWO) giver the right Nikon Backfocus distance between the lens bayonet and sensor. So no problems finding infinity focus. With a filter in you can either short focus a little or restore the required Backfocus with a spacer. In my set the thickest spacer less than 1/3 the filter thickness does the
Job pretty well. I havenít tried any of my wide angle lenses yet. They might be more demanding on the precision of the spacing for edge to edge on full frame. But my telephoto is fine.
The lack of a pin for aperture control on G lenses is something that could have been addressed. The Hutech filter adapter for mirrorless bodies attaching to DSLR lenses has an adjustable one. The Geoptik part has a simple pin that holds the aperture wide open. On the other hand astrophotographers often use simpler Manual
Lenses by Samyang to Zeiss where the aperture control is on the lens anyway. So maybe not such a big deal. My main lens for this has such a ring so I am fine. If you have all Nikon G itís more of a pain. E can be fooled into remaining at an aperture if you have a DSLR.
So I am really pleased. It is very well engineered. Iíll be using it with the 180mm in ADM rings. It will also be a good match for the Samyang 135mm in Nikon form.
Note that this is NOT for Z mount lenses as the flange distance on a Z body is 16mm rather than 46.5mm and there is no known way to make such a lens work with an astrocam where the sensor is 17.5mm down in the camera.
Wednesday, 3 February 2021 | Neil
Very well engineered, indeed one of the best engineered products of this type I have seen. This only makes it more of an irritant that, having remodelled the design ZWO did not include the flange which opens the iris. Just to confirm the point about G type lenses. These are almost all lenses made in the last twenty years as G type was introduced in 2000. These lenses do NOT have an aperture ring and can therefore be only used fully stopped down at f/22 or beyond, which is obviously useless. Older lenses are still available second hand and fortunately I have a couple which I wanted to use and hence the converter, but this is a key point to take onboard.
Wednesday, 21 October 2020 | G.
I wanted the option to add a CMOS camera (ZWOASI183 MC Pro) to my Nikon lenses. This does the job perfectly, no problems with back focus, and it opens all of my Nikon lenses to deep space imaging.
Useful adapter, but not for heavy unsuported lenses or cameras...
Saturday, 6 July 2019 | Susan
The bayonet mount ring design is not firm enough for bigger lenses e.g. Nikkor 300mm f/4.5, which will sag, or if the mount on the lens is used the camera (e.g. Atik Horizon) can sag.
Tuesday, 4 September 2018 | Martyn
Used on a ZWO asi185mc camera.
A good product, but I needed to add spacers between the camera and the adapter to get infinity focus anywhere near the infinity mark on the lens (even more than the spacers supplied. I made one from an old credit card).