About this product
Part Number: FW-50P
Lanparte dummy battery for Sony: A7R, A7, A33, A35, A37, A55, A7S, A7S2, A7R2, A7M2, A5000, A5100, A6000, A6300, A6500, NEXT-5T, 5R, 3N cameras.
This Lanparte dummy battery can be used in place of the original battery Sony NP-FW50 enabling you to power your camera from an external power source such as the Lynx Astro Dew Controllers with DSLR power output.
The dummy battery is the same size and shape as the original battery and has a fully decoded chip so the camera will operate exactly as it does with a standard battery.
Each camera has a small hole / port to enable the power cable to exit the camera body with the battery door closed.
Input voltage requirement: 7.4V-8.4V, center positive 2.1mm DC jack.
Important - do not use more than 8.4V as you risk damage to your camera.
Lynx Astro Dew Controllers
These dummy batteries can be used with the Lynx Astro Dew Controllers fitted with the optional DSLR power output port.
To connect the dummy battery and dew controller, you will need this adapter cable.
Please fill in the form below to ask a question.
Q1. What is the input voltage for the dummy battery?
The input voltage is from 7.4V-8.4V. Please do not use a voltage higher than 8.4V as it may damage your camera.
Q2. The original battery for my camera is marked with 7.2V or 7.4V. Why can the dummy battery have an input up to 8.4V?
A 7.2V or 7.4V camera battery is made of up two 18350 or similar battery cells which, when fully charged output around 8.4v.