About this product
Part Number: ATK0154
It is easy to think of the 16200 as a supercharged 8300, but it’s much, much more.
The huge APS-H size sensor (35mm diagonal) provides an incredible mix of high resolution and sensor real estate, and it's 6 μm pixels make it suitable for use with a range of telescopes. All at a price much more accessible than KAF-11002 and KAF-16803 based cameras.
Features include a sealed, argon-purged, CCD chamber, dual-stage Peltier cooler and powerful heatsink for optimum cooling. With this new camera Atik have achieved their lowest delta, at -45°C typical, and a whopping -50°C max!
The camera also features new bespoke, high quality electronics that deliver a read noise of just 9e- typical and a high end blade shutter for consistent, reliable, performance over the camera’s life span.
Weight is only 1.3 kg, much lower than other cameras currently available in this class.
UPDATE: Atik have released a new EFW3 7-position filter wheel that can be attached directly to the camera and, if the front plate is removed, the backfocus of that combination is reduced to just 34.5mm.
Camera Field of View Simulator
What's in the box
- Camera body with 2” adapter
- 3-metre USB cable
- 1.8-metre battery power connector (car lighter plug)
- CD-ROM with drivers, software and user's manual (PDF)
- Quickstart guide (paper)
|Sensor Type ||CCD - KAF-16200 |
|Horizontal Resolution ||4499 pixels |
|Vertical Resolution ||3599 pixels |
|Pixel Size ||6 µM x 6 µM |
|ADC ||16 bit |
|Readout Noise ||9e- typical value |
|Gain Factor || |
|Full Well || |
|Dark Current || |
>0.25 electrons/second at 0°C
|Interface ||USB 2.0 High Speed |
|Power ||12v DC 2.5A |
|Maximum Exposure Length ||Unlimited |
|Minimum Exposure Length ||200 ms |
|Cooling || |
Thermoelectric set point with max ΔT=>-50°C (-45°C typ.)
|Weight ||approx. 1.3 kg |
|Backfocus || |
Please fill in the form below to ask a question.