About this product
Part Number: C11stdfst
Bob's Knobs are the BEST option for tool-free collimation.
Simple to fit and easy to use.
Collimate your telescope without an Allen key or screwdriver!
Instructions are supplied but can also be found online as well as useful FAQ.
Images are representative and may not show the exact knob size / threads.
IMPORTANT: Please ensure the Bob's knobs threads and factory screw threads match before installation.
Knobs for C11 f/10 with “Trifid” Fastar Secondary Housing and Standard Collimation Screw ThreadsPart:
Celestron 11” (28 cm) f/10 SCT versions (metal or carbon fiber tube) with standard thread factory collimation screws and "Trifid" rotary cover Fastar secondary housing
. Factory collimation screws are silver Phillips. These knobs will also fit the C11 with Starizona Hyperstar
if the collimation screws have standard threads.Knobs:
Black plastic, 16 mm (5/8”) diameterThreads:
Black Anodised Aluminium alloyNotes:
- These telescopes can have factory collimation screws with either standard or metric threads. Silver Phillips collimation screws are standard thread. Some black Phillips collimation screws are also standard thread. See our hints for more information. If you discover your knobs have the wrong threads, you may return your knobs for exchange at no additional cost. Alternatively, you can order knobs with both standard and metric thread screws and return the unused set for a full refund.
- The factory dust cover will fit normally with Bob’s Knobs installed.
- The rotary secondary cover must remain open when the knobs are installed. The cover is cosmetic only and will not affect operation of the telescope.
|Average Rating (1 Review): |
Monday, 8 February 2021 | Michael
make sure you order the correct knobs for your type of telescope as i did, and follow the instructions.
I was able to collimate my SCT in a few minutes without messing with a screwdriver.
Please fill in the form below to ask a question.