Primaluce Lab 10mm PLUS Spacer

Primaluce Lab 10mm PLUS Spacer

  (1 Review)
✓ 2 year warranty


2x in stock shipped 1-2 working days

About this product

Model:  pl_pllspes10
Part Number:  PLLSPES10

Premium quality 10mm PLUS Spacer from Primaluce Lab.

When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others.

That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars.

The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (25mm) which are provided in the package (4 screws).

In the image to the right, the PLUS spacers have been installed between a PLUS Losmandy dovetail bar and PLUS support rings.

Customer reviews

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating (max 5):  
Adequate, expect better
Tuesday, 13 July 2021  | 

I am using these 10mm spacers with the Primaluce 140mm tube rings and their 495mm dovetail plate. The spacers are 7cm long, they couldn't make them any shorter. Each side of the hexagon of the 140mm tube rings is 9cm, so the rings look as though they are perched on the spacers. OK mechanically perhaps but it looks wrong. I have noticed with the dovetail plate that the adonized surface finish isn't particularly robust and collects marks fairly easily. This brand prices itself as a premium product, so I feel justifed in expecting better. The spacers come with four 20mm caphead screws (longer than what was supplied with the tube rings) but in my particular application they are still too short and I've had to get longer screws elsewhere.


Please fill in the form below to ask a question.