iOptron Tri-Pier Portable Pier Tripod
  Zoom
iOptron Tri-Pier Portable Pier TripodiOptron Tri-Pier Portable Pier TripodiOptron Tri-Pier Portable Pier Tripod
iOptron Tri-Pier Portable Pier TripodiOptron Tri-Pier Portable Pier Tripod

iOptron Tri-Pier Portable Pier Tripod

£635.00
  (4 Reviews)
✓ 2 year warranty

:  

3x in stock shipped 1-2 working days

About this product

Model:  iop_tripier_white_8034
Part Number:  8034

Now with higher payload! 

The iOptron Tri-Pier combines the strength and stability of a pier with the levelling flexibility of a tripod.

Aluminium pier and leg tops, stainless steel leg extensions (conveniently stored in pier body) and integral vibration suspension pads. 

Suitable for use with the following iOptron mounts (some require an adapter). 

  • CEM60/CEM70/CEM120
  • CEM40
  • GEM45/GEM45EC (may limit low latitude application 10 Degrees North or less)
  • iEQ45/iEQ45 Pro
  • iEQ30/iEQ30 Pro (may limit low latitude application)
  • AZ Mount Pro/MiniTower/MiniTower II/MiniTower Pro (needs a center post and three leveling screws #8340-PIER)

The Tri-pier also fits other brand mounts with a suitable adapter.

NOTE: The rolling case shown in photo is not included. You can purchase the Tri-Pier with rolling case here

FEATURES

  • Strength of a pier combined with flexibility of a tripod
  • Aluminium pier and leg tops
  • Stainless steel leg extensions (stored in pier body)
  • Integral vibration suspension pads

 

Specifications

Max Payload 220 lbs (100 kg)
Weight ~25.8 lbs (11.7 kg)
Pier Diameter 5.7" (144 mm) with 150mm top plate
Adjustable Height 31.5"-42.5" (800-1080 mm)
Uneven Ground Range 3.35" (85 mm)
Leg Maximum Spread Ø48.8" (Ø1240 mm)
Pier Dimension (folded) Ø12.8"x 26” (Ø325 x 660 mm)

 

Downloads / Manuals

Manual: 

Assembly Instructions

 

Customer reviews

Average Rating (4 Reviews):  
Write a Review and share your opinions!

Rating (max 5):  
Excellent Tri-Pier
14 June 2021  | 

Extremely sturdy and solid, speedy delivery, would certainly order again and FLO always provide a reliable service.


Rating (max 5):  
STURDY AND EASY TO USE
17 September 2020  | 

Brought the TRI-PIER to partner my CEM 70, great combination very sturdy, easy to level up, so buy one if you have a mount in its weight limits you won't regret it.


Rating (max 5):  
Very steady, well designed.
29 May 2020  | 

I bought this recently to go with my new CEM60. Its very steady and adjusts easily so has been a good combo upgrade. Was windy the other night and in the past my old AVX would wobble a little, this didn't! The vibration feet pre-fitted are a nice touch too.


Rating (max 5):  
Very Sturdy!
12 June 2019  | 

Well this is a nice tripod. The central tube is very large in diameter to add great strength. The legs fit inside this tube for storage. I like the way that when fitting the 3 legs, they slide into a stop position so it's easy to repeat the height. When using this to support the AZ Mount it sits on 3 adjustable screws to set it level. This leads to the only niggle I have with the whole thing - the bolt used to secure the mount isn't accessible from underneath so they supply a smaller bolt to use as a bar to turn the bolt from above. However don't let this deter you from buying this superb set up. Anyone who can set up polar alignment is well capable of making a small mod !!! All in all very good. I sat my C11 tube on this today and it's rock solid. Well deserved 5 stars from me.

FAQ

Please fill in the form below to ask a question.

*
*
*
*
Please add the two numbers

Q1. Does the CEM40 mount fit the iOptron tri-pier?

Yes - the CEM40 fits directly to the tri-pier, no additional adapters are required.

Related Products
iOptron Tri-Pier Adapters
£115.00