Sky-Watcher Explorer 200P OTA

Sky-Watcher Explorer 200P OTA


In stock - Shipped 1-2 working days.

Model:  sw200ota
Part Number:  10923
Brand:  Skywatcher


Parabolic Primary Mirror

All Sky-Watcher f/5 (‘fast’) Newtonian Reflectors and Dobsonian models feature high-quality parabolic primary mirrors to eliminate spherical aberrations inherent in ‘fast’ focal length reflector. The mirrors are parabolized to bring all the light rays to the same focal point to give sharp, contrasty images.

Ultra-Thin Secondary Mirror Supports

All Sky-Watcher f/5 Newtonian Reflectors feature 0.5mm ultra-thin secondary mirror supports to reduce diffraction spikes and loss of contrast.


  • Magnification (with eyepieces supplied): x40, x80, x100, x200
  • Highest Practical Power (Potential): x400
  • Diameter of Primary Mirror: 200mm
  • Telescope Focal Length: 1000mm (f/5)
  • Eyepiece Supplied (1.25"): 10mm & 25mm
  • x2 Deluxe Barlow Lens 1.25" (with camera adaptor)
  • Dual-Fit 1.25"/2" Crayford Focuser
  • Parabolic Primary Mirror
  • 0.5mm Ultra-Thin Secondary Mirror Supports
  • 9x50 Finderscope
  • Direct SLR Camera Connection
  • 77% more Light Gathering than 150mm

Note: The Explorer 200P is designed primarily for visual astronomy, for astro-photography consider the Explorer 200P-DS model.

There are currently no specifications available for this product.

Sky-Watcher Explorer 200P OTA Questions & Answers

Please fill in the form below to ask a question.

Your Name
Your Email Address
Your Question

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating (max 5):  
Good all rounder
Friday, 27 April 2018  | 

I have had a 200p for 6yrs ,it is a versatile scope as they say a good all rounder good build quality , ,good aperture so good light gathering, good for imaging and visual use ,comes with a finderscope and 1.25 adapter and 2 inch adapter 10mm 25mm eyepieces and a 2x barlow lens ,DSLR easily fitted for prime focus imaging using the correct adapter for your make of camera ,weight wise it is a little on the heavier side but not overly heavy ,but worth noting ,holds collimation well even with constant lugging about during set up ,easily collimated though changing collimation screws toBobs Knobs makes this process easier to accomplish ,if your looking to upgrade from a smaller telescope or looking for a good imaging scope then i would recommend the 200p .

Customer Services Report
June 2018 / View Older
Positive Feedback read all 5,221 comments
Enquiries Responded to within 6 working hours
Orders Completed within 2 working days