Home > Mounts / Motors > Sky-watcher
(Details shown apply to the default selection)
Model: skywatcher-EQ8-20292Part Number: 20292Brand: Skywatcher
Sky-Watcher EQ8 Manual
Freedom FindTM FunctionThe EQ8 mount is equipped with auxiliary encoders on both the R.A. axis and Dec. axis. Therefore, the mount can keep tracking its current position even when a user unlocks the clutches and rotates the mount in R.A. axis and Dec. axis manually. With this feature, a user can manually operate the mount anytime without worrying about losing the mount’s alignment status. When the user wants to operate the mount with the SynScan hand control again, no alignment is required and all that is needed to be done is to re-lock the clutches.This feature can be enabled or disabled on the SynScan hand controller.Permanent Periodic Error CorrectionThe EQ8 mount is equipped with an index on its R.A. worm thus the motor controller can keep tracking the current position of the worm. After a proper PEC training routine, in which the training data is stored in the motor controller permanently, a user can start the periodic error correction (PEC) at any time to improve the tracking performance for short focal length astrophotography. A training process is not required in the next observing session (assuming that the polar alignment is always accurate), thus this is a Permanent Period Error Correction (PPEC). A user can train the mount with manual guiding or auto-guiding. For detailed instructions,Batch Exposures FunctionThe EQ8 mount is equipped with a SNAP port which can control the shutter release of a camera. Working with the SynScan hand control’s “Camera Control” function, a user can take batch exposures when doing astrophotography. Up to 8 groups of “Exposure-time & Frames” combinations can be set on the SynScan hand controller. For detailed information, refer to the SynScan hand control’s instruction manual.Auto-Home FunctionThe EQ8 mount is equipped with two home position sensors. Working with the SynScan hand controller, the mount can be placed to the same home position after turning on the power. For detailed information, refer to the SynScan hand control’s instruction manual.
The diagram below will be useful to those wanting to mount an EQ8 head to an existing pier.
The above specifications may be changed without advance notice.
Be the first to Write a Review for this item!
Lynx Astro FTDI EQDIR USB Adapter for Sky-Watcher EQ5 PRO, HEQ5 Syntrek & PRO, EQM-35 PRO, AZ EQ5-GT, EQ6-R PRO, AZ EQ6-GT and EQ8£34.00
Lynx Astro Silicone Power Cable for Sky-Watcher EQ8 MountsFrom: £21.00
Sky-Watcher Polarscope for EQ8£98.00
QHY PoleMaster with adapter for EQ8 Mounts£278.00
Sky-Watcher EQ8 Power Cable£21.00
Lynx Astro Premium Handset Cable for Sky-Watcher EQ5 PRO, HEQ5 PRO & Syntrek, AZ EQ5-GT, EQ6-R PRO, AZ EQ6-GT and EQ8 Mounts£29.00
Lynx Astro Silicone Power Cable 2.1mm DC Jack to GX16-2 DC JackFrom: £20.00
First Light Optics LtdUnit 7 Budlake UnitsBudlake RoadMarsh Barton Trading EstateExeter, DevonEX2 8PY
Company No. 5892293VAT No. 907 2895 01
First Light Optics Ltd All rights reserved © 2018