TeleGizmos 365 Tripod Cover Dual Material w/ Solar Liner
  Zoom

TeleGizmos 365 Tripod Cover Dual Material w/ Solar Liner

£134.00
  (1 Review)
✓ 2 year warranty

:  

Out of stock due 10-15 working days

About this product

Model:  telegizmos_t3tp-s
Part Number:  T3TP-S

TeleGizmos Warranty

TeleGizmos 365-series covers are warranted for one year from date of delivery including all labor and material. If your cover fails due to either a manufacturing or material defect, TeleGizmos will repair or replace the cover during this warranty period. Proof of purchase required. This warranty is fully transferable but does not include normal wear and tear.

TeleGizmos 365-series are the BEST telescope covers money can buy! 

Three panel tripod cover that opens fully along one side.

The TeleGizmos 365 series are designed for severe weather protection.

Features an inner layer of aluminised material for radiant heat protection coupled to an outer cover of highly water, UV and mildew-resistant acrylic coated woven polyester. This combination of materials provides years of protection, even when used outside 24/7, 365-days a year. 

The outer material also offers high strength and abrasion resistance with less than 1% shrinkage or stretch. 

Tested in some of the harshest US environments, including the desert southwest, Florida Keys, Colorado @ 8000 feet and the Texas Hill country, the 365 Series has proven itself capable of handling all types of weather.

 

 

365 COVER FEATURES

  • Multi-layered material for increased protection.
  • Can be used outside for all-weather 24/7, 365-day protection.
  • Highly water resistant acrylic coated woven polyester outer cover.
  • Aluminised inner-layer provides radiant heat protection.
  • Moisture penetration tested at 40 PSI (1/2" concentrated stream).
  • UV and mildew resistant.

Please note, images are for illustrative purposes and may not show the exact size cover you are ordering.

Specifications

Outer Canvas: Woven Polyester

Properties

Test Method

Target

Control Limits

Weight (oz/yd sq.) 

ASTM D3776

11oz

+/- 1.0 oz/yd sq

Tensile (lbs/in.)

ASTM D5034 Warp

>325

>325

 

ASTM D5034 Fill

>265 

>265 

Tear (lbs) 

ASTM D2261 Warp

>30

>30

 

ASTM D2261 Fill  

>25   

>25   

Water Resistance (Hydro)

AATCC #127

>25 inches

 >25 in. minimum

Water Repellency (Spray)

AATCC #22 

Rating 90

90 minimum

Colour Fastness

AATCC #8

Grade 4

4 minimum

Exterior Weather Rating

 

5 Years

 

Inner Radiant Barrier: Polyethylene/Astrolar Fiber; Multi layered

Properties

Target

Control Limits

Weight (mill) 

6

>6

Aluminum Dispersion (ohms)

+/- 5%

<3%

Tear (lbs)   

100

>100

Stretch (lbs) 

50

>50

Water Penetration (Hydro)

0

0

Customer reviews

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating (max 5):  
Purchased for a Celestron Advanced VX Mount
Wednesday, 15 July 2020  | 

the product has just arrived and the fit on the tripod fully extended is pretty tight I have a USB Hub attached to one of the legs, but i am going to have to rethink on the placement. on that same leg i have the hand controller. as said it is a tight fit and the best i achieved is the whole tripod covered with the exception of the bottom inch or two as the cover wont stretch that wide. and the top opening is riding up an inch or two. The material it is made from is very very nice and i can see this providing excellent protection provided i keep humidity under the cover in check. I will over the next week and check the fit better once i have rewired my tripod and will be upgrading to 5 stars as long as the riding up of the cover does not hinder the mounts movement.

FAQ

Please fill in the form below to ask a question.

*
*
*

Related Products
TeleGizmos Solar Tripod Cover
£58.00

Covid-19: We are open for business as usual. Some deliveries are a little delayed. All deliveries are contact free. Thank-you for choosing FLO 🙂