About this product
Part Number: T3R6
TeleGizmos 365-series covers are warranted for one year from date of delivery including all labor and material. If your cover fails due to either a manufacturing or material defect, TeleGizmos will repair or replace the cover during this warranty period. Proof of purchase required. This warranty is fully transferable but does not include normal wear and tear.
TeleGizmos 365-series are the BEST telescope covers money can buy!
Suitable for 127-152mm / 5-6" Refractors on Equatorial Mounts. 152cm / 60" major top line, 152cm / 60" major height.
The TeleGizmos 365 series are designed for severe weather protection.
Features an inner layer of aluminised material for radiant heat protection coupled to an outer cover of highly water, UV and mildew-resistant acrylic coated woven polyester. This combination of materials provides years of protection, even when used outside 24/7, 365-days a year.
The outer material also offers high strength and abrasion resistance with less than 1% shrinkage or stretch.
Tested in some of the harshest US environments, including the desert southwest, Florida Keys, Colorado @ 8000 feet and the Texas Hill country, the 365 Series has proven itself capable of handling all types of weather.
NOTE: The cover does an excellent job of keeping out the weather but cannot eliminate condensation (the buildup of condensation is sometimes mistaken for a leak). This is true for all telescope covers. So the telescope must be allowed to dry after each use, before applying the cover. If the telescope is used only rarely and/or your area is prone to dew (i.e. in a valley or near a body of water), we recommend you occasionally remove the cover to let the telescope dry.
365 COVER FEATURES
- Multi-layered material for increased protection.
- Can be used outside for all-weather 24/7, 365-day protection.
- Highly water resistant acrylic coated woven polyester outer cover.
- Aluminised inner-layer provides radiant heat protection.
- Moisture penetration tested at 40 PSI (1/2" concentrated stream).
- UV and mildew resistant.
- Can be securely fastened to your scope with built-in draw string.
- Additional draw string and clips provide extra security around the middle of the cover.
Please note, images are for illustrative purposes and may not show the exact size cover you are ordering.
Outer Canvas: Woven Polyester
Weight (oz/yd sq.)
+/- 1.0 oz/yd sq
ASTM D5034 Warp
ASTM D5034 Fill
ASTM D2261 Warp
ASTM D2261 Fill
Water Resistance (Hydro)
>25 in. minimum
Water Repellency (Spray)
Exterior Weather Rating
Inner Radiant Barrier: Polyethylene/Astrolar Fiber; Multi layered
Aluminum Dispersion (ohms)
Water Penetration (Hydro)
|Average Rating (1 Review): |
10 February 2020 | Graham
I use this to cover a Skywatcher EQ6-R mount and tripod, kept outside, while the telescope (a Skywatcher Esprit 120 mm) is kept inside. When I want to use the telescope its a quick job to remove the scope cover and carry the telescope out to the mount. The cover has taken heavy rain and high winds over the winter and has kept the mount and tripod dry and clean. Spiders have been found nesting on the mount and on one occasion, after a frost, I found that a small amount of condensation had formed on it. However these are very minor problems. Using the cover means that I can leave the very heavy EQ6-R mount and tripod set up outside, aligned, and ready to go.
Please fill in the form below to ask a question.