About this product
Part Number: ZWO-EFW-8x1.25
New! ZWO EFW 8x 1.25" or 7x 36mm position filter wheel. Only 400g!
- Supports 8x 1.25" mounted filters / 8x 31mm unmounted filters or 7x 36mm unmounted filters.
- Stepper motor made by NPM from Japan - quality and reliability you can trust.
- Rotates in both directions for faster filter selection
- CNC machined body from a full block of aircraft grade aluminium enabling a very thin 20mm design.
- Powered by USB - max consumption around 120ma@5v
- ASCOM driver
Filter to sensor distance when connected to the ASI1600 is around 10mm, you can use 1.25" filters without vignetting up to f/5 or 31mm filters up to f/2.
Includes M2 screws and washers required for fixing unmounted 31mm filters.
Important Note: 1.25" filters require threads shorter than 3mm and the height without threads must be less than 7mm.
What's in the box
- EFW Body (8 x 1.25" / 31mm or 7 x 36mm)
- T2 Nosepiece
- 1.25" Holder to T2
- USB2.0 Cable
- M2 Screws & Washers for 31mm Filters
Downloads / Manuals
The following manuals and downloads are available for this product:
ZWO Software and Drivers
|Average Rating (1 Review): |Great product at a great price.
Thursday, 20 September 2018 | Adam
Got one of these to use with my ASI1600mm pro and it is a great bit of kit. My 1.25 inch mounted Astrodon Filters do fit in this despite being 7.5 mm thick and the stated max for the wheel being 7 mm....but only by a fraction of a mm, the tolerances would not have to be far out to cause a problem.
Please fill in the form below to ask a question or request a price match.