About this product
Part Number: ZWO-DC12V5A-EUR
ZWO 240V AC to 12V 5A DC Power Supply Adapter for Cooled Cameras.
NOTE! Manufactured for indoor use.
Camera side connection: 5.5mm/2.1mm jack
Length of cable: between camera and PSU, approx 110cm
Input: 100 - 240V, 50/60Hz, 1.5A
Output: 12V, 5A, 60W max
Certifications: TUV, CE, UL etc.
UK Standard Plug: supplied with UK standard fused mains plug. Can be used in UK, Hong Kong, Singapore, Malaysia, Vietnam, Indonesia, The United Arab Emirates etc.
European Standard Plug: Can be used in France, the Netherlands, Denmark, Finland, Norway, Poland, Portugal, Austria, Belgium, Hungary, Spain, Sweden , South Korea, Russia etc.
American Standard Plug: Can be used in US, Canada, Japan, Brazil, Taiwan etc.
Chinese Standard Plug: Can be used in China, Australia, New Zealand, Argentina etc.
|Average Rating (4 Reviews): |It does the job but the cable is too short
Sunday, 20 September 2020 | Paul
As a PSU there is nothing to fault. It plugs in and delivers power to the camera. All good.
My only criticism is the lead from PSU to to camera is quite short. This is an easy fix with an extension, but out of the box it would ideally be longer. Using an extension gives the added bonus of a break point in the cable, which should seperate if anything snags.
So yep - does the job, but is also a little frustrating, There's not much else to be said about a PSU!
Monday, 8 June 2020 | Sandra
This cable is not a ZWO 240V AC to 12V 5A DC Power Supply Adapter for Cooled Cameras. Advised them item provided not correct , I was told came from ZWO I shared a link for cable at half the price that confirmed 2.5 not 2.1) after mainy emails where i was told that is not the correct size and the cable I was sharing was not what I had been sold( even though the make and model number were exactly the same, i shared a picture that confirmed excatly that and what i had said from the start this cable is 2.5 not 2.1
The plug size issue was not mentioned until a number of emails were sent backwards and forwards around the branding of this as it is not specifically 'ZWO' branded. It is made by a 3rd party manufacturer as is common with all camera companies, it is much cheaper to buy in power supplies than make your own!
Had the size issue become apparent earlier in the conversation we would've instantly realised there was a mix-up with this specific adapter and although it was supplied to us by ZWO, it is not the correct item.
We've not had this issue with these power supplies before so suspect it was a one-off. If anybody else is affected please let us know and we will swap it over.
Sunday, 17 November 2019 | Andrei
Like all manufactures, this one also has the heavy cable that gets really hard during cold nights. Even at 4-5C it's hard has rock. This can be a problem for your cable management.
Other than that, the power is stable and I have no problem to cool down the 1600MM Pro.
Tuesday, 22 October 2019 | Mike
Nice little power supply.
Please fill in the form below to ask a question.