TKAstroservice Lens Clamp System for Samyang/Rokinon/Walimex 135mm f2 Lens
  Zoom
TKAstroservice Lens Clamp System for Samyang/Rokinon/Walimex 135mm f2 LensTKAstroservice Lens Clamp System for Samyang/Rokinon/Walimex 135mm f2 LensTKAstroservice Lens Clamp System for Samyang/Rokinon/Walimex 135mm f2 Lens
TKAstroservice Lens Clamp System for Samyang/Rokinon/Walimex 135mm f2 LensTKAstroservice Lens Clamp System for Samyang/Rokinon/Walimex 135mm f2 LensTKAstroservice Lens Clamp System for Samyang/Rokinon/Walimex 135mm f2 Lens

TKAstroservice Lens Clamp System for Samyang/Rokinon/Walimex 135mm f2 Lens

£89.00✓ 2 year warranty
Choose:  

:  

4x in stock shipped 1-2 working days
Share

About this product

Model:  tkastroservice_lens_clamp_black
Part Number:  LCS-S135-B

TKAstroservice Lens Clamp System for Samyang/Rokinon/Walimex 135mm f2 Lens. 

Designed for use with Samyang/Rokinon/Walimex 135mm F2.0 ED UMC (T2.2 VSDLR ED UMC). 

The TK Lens Clamp System enables the Samyang 135mm F2.0 lens to be used as a telescope.

Mounting options:

Vixen Style

Arca-Swiss

1/4" Camera Screw

Rotational markings are located on the front clamp, which you can use to set the lens rotation precisely. This is particularly useful if you want to shoot the same target over multiple nights, as it allows you to quickly find the correct rotation again. We recommend using a tool like Stellarium/N.I.N.A to determine the desired rotation beforehand.

Note there are no numbers for rotation printed on the front clamp. The instruction manual explains how to read the markings.

There are M4 threads on the sides for mounting additional equipment (e.g. ZWO EAF, ZWO ASIAIR Adapter).

The finder shoe allows the use of a viewfinder or a guidescope. Below the finder shoe, there is room for the focus module. The focus can be precisely and securely set by using the worm drive. One complete revolution of the focus knobs turns the focus ring only about 3°. This makes focusing easy and precise.

The lens clamp system is modular and allows various configurations. All Accessories can be used simultaneously.

A detailed instruction manual for setting up the lens clamp system and its accessories is included.

The lens clamp system is 3D printed using PETG. This material is UV resistant, so it can be used outdoors in direct sunlight without any problems. The glass transition temperature of PETG is 85°C (185°F). At this temperature, the material starts to deform. Therefore, we recommend keeping the lens clamp system in an environment below 60°C (140°F). The usual minor imperfections associated with 3D prints, like layer lines, can be seen on the printed parts. 

What's in the box

  • Mounting plate with Vixen Style, Arca-Swiss and 1/4" mounting options
  • 2x Clamps with rotational markings on the front clamp
  • Finder shoe with focus module
  • Worm and worm gear
  • Screws and hex keys

Customer reviews

Be the first to Write a Review for this item!

FAQ

Please fill in the form below to ask a question.

*
*
*
*
Please add the two numbers