Baader Click-Lock 2" for Celestron & Meade SCT

Baader Click-Lock 2'' for Celestron & Meade SCT


In stock - Shipped 1-2 working days.

Model:  baader-2956220
Part Number:  2956220
Brand:  Baader

Screws directly to SCT telescopes with a standard 2" threaded back such as the Meade 8" and the Celestron 8" and 9 1/4". 

Once you start using the Baader Baader ClickLock Terminal you’ll never want to go back…

The ClickLock mechanics have already been tried and trusted with Baader's earlier 1.25" model. The larger 2" ClickLock series is even better! 


Features of the Baader 2-inch ClickLock System

  • Even a 20 degree rotation of the rotary lever sufficient enough to firmly and safely secure any 2” accessory.
  • The heaviest tested load is a complete C14 telescope with bolt-SCL terminal (# 2956233) and a 2 "Click Lock diagonal (# 2926100) with Scopos 30mm Ultra eyepieces (# 3004030) shown in the photo. The C14 was raised by holding the eyepiece! (We don't recommend this, please don't try it). 
  • Ratchet function - shows acoustic and haptic display of the position of the clamp. You’ll be able to recognise even in the dark and without examination if the terminal is open or closed.
  • Massive clamp (tension ring) holds  even the most expensive accessories absolutely safe and free of scratches and bruises.
  • CL-terminals - available for many telescope systems. Extensive range of clips allows the retrofitting of the Baader 2” ClickLock-clamping on many telescopes (or accessories). (More ClickLock terminals for Vixen and other branded telescopes are in preparation)
  • The position of the rotary lever is adjustable by 6 camera-head screws, or by 6 Allen keys; with the help of these the CL terminal can be set for left-handed operation as an option. 

There are currently no specifications available for this product.

Baader Click-Lock 2" for Celestron & Meade SCT Questions & Answers

Please fill in the form below to ask a question.

Your Name: *
Your Email Address: *
Your Question: *
Please add the two numbers

Q1. How does the Baader Click-Lock 2" for Celestron & Meade SCT attach to my telescope?

On the rear of your telescope there is a thread that the click-lock adapter will screw into. This thread will currently have your visual back (which holds the diagonal) screwed into it, simply unscrew this to reveal the thread.

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating (max 5):  
Brilliant Device
Wednesday, 8 May 2013  | 

I recently bought the Baader 2" Quicklock after I had problems with the suppled visual back that came with my scope. A couple of months ago while outside observing the little knurled screw that holds the diagonal in place worked loose and the diagonal and brand new Hyperion eyepiece fell out. Luckily onto soft grass, so no damage was done. I was concerned that it might happen again though. That is when I found out about the Baader Quicklock. I was looking for a 2" one as I felt that I wanted to push my scope a little more (C 9.25) by having the option of using 2" eyepieces. Well it arrived last week along with a Williams Optics 2" Carbon Dielectric diagonal and Hyperion Aspheric 36mm ep. And what a fantastic piece of kit the Quicklock is. So easy to fit and use. The way it grips the diagonal without damaging it is a very clever, but simple idea with the collar gripping the nosepiece of my diagonal right around it instead of just at one point with a screw gouging into the metal. No more worries about anything falling out again.
So in summary. Would I recommend the Baader Quicklock???? Hell yes!!!

Customer Services Report
October 2017 / View Older
Positive Feedback read all 4689 comments
Enquiries Responded to within 6 working hours
Orders Completed within 2 working days