ZWO M54 Tilt Adjuster
 ZWO M54 Tilt AdjusterZWO M54 Tilt Adjuster 

ZWO M54 Tilt Adjuster

  (2 Reviews)
✓ 2 year warranty


2x in stock shipped 1-2 working days

About this product

Model:  zwo_m54-tilter
Part Number:  ZWO M54-TILTER

ZWO M54 Tilt Adjuster

Compatible Camera Types: ASI2600 Pro Series/ASI6200 Pro Series/ASI2400MC Pro

The significant advantage of this Tilt Adjuster is that the three rear adjustment points ensure tilt adjustment is much easier than removing the tilt plate from the camera.

Installation steps for the M54-Tilter

1. Remove the M54-Tilter from the packaging box and use an Allen wrench to remove the three cylindrical screws on the top.

2. Remove the original sensor tilt plate from the cooled camera.

3. Place the base of the M54-Tilter onto the cooled camera and fasten it with six Phillips flat-head screws (specification: M2.5*6).

4. Cover the top of the M54-Tilter, turn the camera over, and fasten it with three cylindrical screws from the back.

Customer reviews

Average Rating (2 Reviews):  
Write a Review and share your opinions!

Rating (max 5):  
Quality tilt adapter at great price
08 January 2024  | 

Great M54 tilt adapter used for my new ASI2600MC Duo. Great product for removing any tilt found in the camera. Usual fantastic service from FLO. Thanks.

Rating (max 5):  
A very big improvement over the stock tilt plate
09 August 2023  | 

This is a far better tilt plate then I had envisaged.

The stock tilt plate on the ASI6200 and 2600 cameras had very little thought. How were you expected to adjust for tilt when the adjustement screws are on the front of the camera and any adjustment caused the plate to float in place thus making adjustments near impossible?

The new tilt plate addresses these concerns. The floating plate issue has been addressed by the compression of a foam ring which is nice and tight- so if you move a screw for adjustment which is now on the rear the tilt plate stays in position & moves easily to the new selected position. This will make adjustments very easy & precise and it is very clear as to where the adjustment screws and lock screws are placed.

The only criticism and it is small is that I wish ZWO had supplied a long allen key that could be used to easy adjustment as it would be ideal if the key cleared the top of the camera. You may be able to adapt an allen key to suit- it just needs to be long.


Please fill in the form below to ask a question.

Please add the two numbers